When an iPhone does not charge after it has completely died, there are a few potential factors to consider. Firstly, it’s important to ensure that the charging cable and adapter are working properly. Try using a different charger or a different USB cable to rule out any issues with the charging accessories.
Another reason for the iPhone not charging after it died could be a drained battery that needs time to recharge before displaying any signs of charging. In this case, allow the iPhone to charge for at least 15-30 minutes before attempting to turn it on.
If the above steps don’t resolve the issue, it’s possible that the charging port on the iPhone is dirty or damaged. Inspect the charging port for any debris or lint and gently clean it using a non-metallic tool. Alternatively, you can try using compressed air to blow out any dirt or debris.
In some cases, a software issue may be preventing the iPhone from charging. Restarting the device or performing a hard reset can help resolve software glitches that could hinder charging.
If none of the aforementioned solutions work, it may be necessary to seek professional assistance. Contact Apple Support or visit an authorized service center to diagnose and potentially repair the hardware issue that is preventing the iPhone from charging after it died.
Video Tutorial:Why won t my iPhone power back on after dying?
How long does it take for a dead iPhone to charge?
The duration it takes to charge a dead iPhone depends on several factors. The primary considerations are the battery capacity and the charging method used. For the latest iPhone models such as the iPhone 14, iPhone 14 Pro, and iPhone 14 Plus, you can expect a battery capacity ranging from around 3000mAh to 3500mAh.
Assuming you are using the original charger and cable provided by Apple, which generally offer the fastest charging speeds, a dead iPhone battery can typically take around 30 minutes to reach a 50% charge. However, to reach a full 100% charge, it may take approximately 1 to 2 hours, depending on the model and battery health.
Keep in mind that if you are using a wireless charging method, the charging speeds may be slightly slower compared to using a wired connection. Furthermore, if the iPhone is in use while charging, it may take longer to reach a full charge as the device is simultaneously consuming power.
It’s worth noting that battery health also plays a role in charging times. Over time, batteries tend to degrade, which can result in slower charging speeds. If a dead iPhone consistently takes significantly longer to charge or doesn’t charge beyond a certain percentage, it could indicate a battery issue, and it may be advisable to consult with Apple support or consider battery replacement options.
To ensure optimal charging speeds and overall battery performance, it’s recommended to use genuine Apple chargers and cables, as well as following Apple’s guidelines for battery maintenance and avoiding practices such as extreme temperature exposure and frequent full discharges.
How do you bring a dead iPhone back to life?
To bring a dead iPhone back to life, follow these steps:
1. Check the charging cable and power source: Make sure the charging cable is not damaged and securely connected to both the iPhone and a working power source. Try using a different charging cable and power adapter if available.
2. Hard reset your iPhone: Depending on your iPhone model, perform a hard reset by pressing and holding the Power button and the Volume Down button (or Home button for older models) simultaneously until the Apple logo appears. This may help restart the device and resolve minor software glitches.
3. Check for physical damage: Inspect your iPhone for any physical damage, such as a cracked screen or water damage. If you notice any significant damage, you may need to seek professional repair assistance.
4. Try charging with a computer: If the iPhone doesn’t charge using the wall adapter, connect it to a computer using a USB cable and see if it starts charging. Sometimes, a computer can bypass certain charging issues and provide enough power to revive the device.
5. DFU (Device Firmware Update) mode: If the iPhone remains unresponsive, you can try putting it into DFU mode to restore the firmware. Connect the iPhone to a computer, launch iTunes (or Finder on macOS Catalina and later), then follow the specific DFU mode instructions for your iPhone model. This will erase everything on the device, so ensure you have a recent backup beforehand.
6. Seek professional assistance: If none of the above steps work, it might indicate a more complex hardware issue. Reach out to Apple Support or an authorized service center for diagnosis and potential repair options.
Remember, attempting any repairs or troubleshooting steps should be done at your own risk, and it’s always advisable to consult official channels or professionals for more accurate guidance specific to your situation.
What happens when iPhone battery is completely dead?
When an iPhone battery is completely dead, it means that it has run out of charge or depleted its power entirely. In such a situation, the iPhone will typically shut down and become unresponsive until it is connected to a power source for charging.
When you connect a completely dead iPhone to a power outlet or a computer using a Lightning cable or USB-C cable, it will usually display a battery icon on the screen after a few minutes. This signifies that it is receiving power and is in the process of charging. It’s important to note that it may take a little while for the battery to gather enough energy to turn the device back on. Therefore, you may not be able to use your iPhone immediately after connecting it to a power source.
Additionally, if your iPhone’s battery has been completely drained for an extended period, it may take longer to charge initially. This situation occurs because lithium-ion batteries, which are commonly used in iPhones, have a built-in safety mechanism that prevents them from charging when they are fully discharged. This safeguard allows the battery to stabilize before power is reintroduced, which helps extend its overall lifespan.
In conclusion, when an iPhone battery is completely dead, the phone will shut down and become unresponsive until connected to a power source. After connecting, it may take some time for the battery to gather enough charge to turn the device back on.
Why isn’t my phone turning on after it died?
There could be a few reasons why your phone is not turning on after it died. Here are some possible explanations to consider:
1. Battery depletion: If your phone’s battery completely died, it might take some time for it to regain enough charge to power on. Connect your phone to a power source using the original charging cable and adapter, and give it some time to charge. It’s advisable to leave it connected for at least 30 minutes to ensure sufficient charge.
2. Faulty charger or cable: Sometimes, the issue might not be with your phone itself but with the charger or cable you are using. Ensure that the charger and cable are working properly by testing them with another device or using a different charger and cable on your phone.
3. Power button or hardware issue: It’s also possible that your phone’s power button is not functioning correctly or there is an underlying hardware problem. Try gently pressing the power button multiple times to ensure it’s not stuck or jammed. If you suspect a hardware issue, it might be necessary to take your phone to a professional for repair.
4. Software or system crash: In some cases, a software or system crash can prevent your phone from turning on. If you’ve recently installed any new apps or made changes to the software, it’s possible that a conflict or glitch is causing the issue. Try performing a forced restart by holding down the power button and volume down button (or home button, depending on the model) simultaneously for about 10-15 seconds. This can help reset the software and potentially resolve the problem.
If none of the above steps work, you may need to reach out to your phone manufacturer’s support or visit an authorized service center to get further assistance. They will have the expertise to diagnose and fix more complex issues that may be causing your phone not to turn on.
Why do iPhones take forever to turn on after dying?
iPhones can sometimes take a bit longer to turn on after completely running out of battery due to several reasons. One of the key factors is that when an iPhone completely dies, it needs to go through a series of startup processes before it can fully turn on. During this time, the device is booting up, performing system checks, and loading various software components. This initial startup process can take a bit longer, especially if the iPhone’s battery has been fully drained.
Another reason for the delay is related to the power management systems in iPhones. When the battery reaches critically low levels, the device enters a low-power mode, which aims to conserve energy. This low-power mode reduces the functionality of the iPhone and slows down processes to conserve battery life. When the device is being powered back on, it takes some time for it to transition from the low-power state to normal operation, resulting in a delay.
Additionally, the length of time it takes for an iPhone to turn on after dying can also depend on the overall health and condition of the device. Older iPhones or those with degraded batteries may take more time to boot up as they may need to recalibrate and optimize power usage.
To minimize the delay in turning on an iPhone after it’s completely died, it’s generally recommended to charge the device using a genuine Apple charger and cable. This ensures an optimal charging speed and helps avoid potential battery-related issues that may contribute to longer startup times.
Can a completely dead phone battery be recharged?
Yes, a completely dead phone battery can typically be recharged. When a phone battery is completely discharged, it means it has reached a critically low voltage level, which causes the phone to shut down. To recharge it, you would need to connect your phone to a power source such as a charger or a computer USB port.
However, it’s important to note that if a battery is excessively discharged and left in that state for a prolonged period, it may become damaged or unable to hold a charge effectively. In such cases, you might experience decreased battery life or other issues.
When dealing with a completely dead phone battery, it’s advisable to use the original charger and cable that came with the device, as they are specifically designed to provide the correct voltage and amperage for your phone.
Additionally, it’s worth mentioning that modern smartphones often have built-in protections to prevent batteries from reaching critically low levels. They may automatically shut down before the battery is fully depleted to avoid potential long-term damage. In these situations, connecting your phone to a power source should initiate the recharge process once the battery has gained sufficient charge to power on the device.