Have you encountered a situation where your iPhone 6S Plus is unresponsive or experiencing software issues? Performing a hard reset can help resolve these issues by forcing your device to restart. In this tutorial, we will guide you through the steps to hard reset your iPhone 6S Plus without using iTunes.
Step 1: Press and hold both the Sleep/Wake button (located on the right side of your device) and the Home button (located on the front of your device) simultaneously.
Step 2: Continue holding both buttons until you see the Apple logo appear on the screen. This may take about 10 seconds.
Step 3: Release both buttons when the Apple logo appears. Your iPhone will then boot up and restart.
Step 4: Wait for your device to complete the restart process. This may take a few minutes.
Step 5: Once your iPhone 6S Plus has finished restarting, you can start using it again as usual.
| Pros | Cons |
|---|---|
| 1. Simple and quick process to reset your iPhone. | 1. Data stored on your device may be lost if not backed up. |
| 2. No need for a computer or iTunes. | 2. May not always resolve complex software issues. |
| 3. Does not require any technical knowledge. | 3. Certain issues may require additional troubleshooting steps. |
Performing a hard reset on your iPhone 6S Plus can be a handy solution when your device becomes unresponsive or encounters software problems. It is a straightforward process that does not require the use of iTunes or a computer. However, it’s important to note that a hard reset may result in the loss of any unsaved data, so it’s always a good idea to back up your information regularly.
Video Tutorial:How do I factory reset my iPhone 6s without password or iTunes or computer?
How do I factory reset my locked iPhone 6s Plus?
To factory reset a locked iPhone 6s Plus, you can follow these steps:
1. Start by turning off your iPhone 6s Plus completely. Press and hold the power button until the "Slide to power off" slider appears, then swipe it to shut down the device.
2. Once your iPhone is powered off, press and hold the Home button (the circular button on the front) while connecting the device to your computer using a USB cable. Keep holding the Home button until you see the iTunes logo with a cable displayed on the screen. This will put your iPhone into recovery mode.
3. Launch iTunes on your computer. It should recognize the iPhone in recovery mode and display a message saying that it has detected an iPhone in recovery mode.
4. In iTunes, you will have the option to restore your iPhone to its factory settings. Click on the "Restore iPhone" button. This will erase all data and settings on your device.
5. Follow the on-screen instructions to confirm the restoration process. iTunes will then download the necessary iOS software, erase your iPhone, and install a fresh copy of iOS.
6. Once the factory reset process is complete, your iPhone 6s Plus will restart and you can set it up as a new device or restore it from a previous backup.
It’s important to note that performing a factory reset will erase all data on your iPhone, including apps, photos, contacts, and personal settings. Make sure you have a backup of your important data before proceeding with the factory reset.
Can you factory reset iPhone without iTunes and passcode?
Yes, it is possible to factory reset an iPhone without using iTunes and without knowing the passcode. Here are a few methods you can try:
1. Use the Settings App:
– Open the Settings app on your iPhone and go to "General."
– Scroll down and tap on "Reset."
– From the list of options, choose "Erase All Content and Settings."
– Enter your device passcode, if prompted.
– Confirm the reset by selecting "Erase iPhone."
2. Use iCloud:
– Make sure your iPhone is connected to a stable Wi-Fi network and has enough battery life.
– On a computer or another iOS device, open a web browser and go to icloud.com.
– Sign in to your iCloud account using the Apple ID associated with your iPhone.
– Once signed in, click on "Find iPhone."
– On the next screen, click on "All Devices" at the top and select your iPhone from the list.
– In the device’s info window, click on "Erase iPhone."
– Confirm the erase action, and your iPhone will be reset to factory settings.
3. Use Recovery Mode:
– Connect your iPhone to a computer using a Lightning cable.
– Open iTunes if it doesn’t launch automatically.
– Put your iPhone into Recovery Mode by following the specific steps for your iPhone model (which may involve pressing specific buttons in a particular sequence).
– Once in Recovery Mode, a message will appear in iTunes asking if you want to "Restore" or "Update" your iPhone. Choose the "Restore" option.
– iTunes will download the latest iOS firmware for your device and install it, effectively resetting it to factory settings.
Keep in mind that factory resetting your iPhone will erase all data, settings, and apps stored on it. It is recommended to create a backup of your iPhone data before proceeding with any of these methods.
How do I force my iPhone 6s to factory reset?
To perform a factory reset on your iPhone 6s, follow these steps:
1. Back up your data: Before proceeding with a factory reset, it’s important to back up your iPhone 6s to avoid losing any valuable data. You can use iCloud or connect your device to a computer and create a backup using iTunes or Finder.
2. Disable Find My iPhone: To ensure a smooth factory reset process, make sure to disable the Find My iPhone feature on your device. You can do this by going to Settings > [Your Name] > Find My > Find My iPhone and toggle it off.
3. Reset settings: Start by resetting the settings on your iPhone 6s. Go to Settings > General > Reset and select the "Reset All Settings" option. This will reset all your settings to their default values, but it won’t erase your data.
4. Erase all content and settings: To proceed with the factory reset, navigate to Settings > General > Reset again, but this time select the "Erase All Content and Settings" option. You may need to enter your passcode and Apple ID password to confirm the action.
5. Wait for the reset: After initiating the factory reset, your iPhone 6s will begin the process, which usually takes a few minutes. Your device will restart and display the "Hello" screen once the reset is complete.
6. Set up your iPhone: Once the factory reset is done, you can go through the initial setup process. Follow the on-screen instructions to select your language, region, Wi-Fi network, and set up Face ID or Touch ID, if available.
It’s important to note that a factory reset will erase all content and settings from your iPhone 6s, returning it to its original factory state. Make sure you’ve backed up your data beforehand and consider if you really need to perform a factory reset, as it can’t be undone.
How to hard reset iPhone 6s plus without computer?
Performing a hard reset on an iPhone 6s Plus without a computer is a relatively simple process. Here’s how you can do it:
1. Press and hold the Power button (located on the right side or top of your iPhone) and the Home button (located at the bottom of the screen) simultaneously.
2. Keep holding both buttons for about 10 to 15 seconds until you see the Apple logo appear on the screen.
3. Release both buttons when the Apple logo appears. Your iPhone will restart, and the hard reset process will be complete.
Performing a hard reset can be helpful in resolving minor software issues or when your iPhone becomes unresponsive. However, it’s important to note that a hard reset will not erase any data or settings on your device. If you’re looking to completely erase your iPhone and restore it to factory settings, you will need to perform a factory reset, which requires a computer and iTunes or Finder.
Keep in mind that the steps mentioned above apply specifically to the iPhone 6s Plus model. If you have a different iPhone model, the buttons and steps for a hard reset may vary, so ensure you are following the appropriate instructions for your specific device.
It’s worth mentioning that it’s always a good practice to regularly back up your iPhone data to avoid any data loss or inconvenience. Additionally, if you’re experiencing persistent issues with your iPhone, it’s recommended to seek assistance from Apple support or visit an authorized service center for further guidance.
How do I factory reset my iPhone 6s Plus?
To factory reset your iPhone 6s Plus, follow these steps:
1. Backup your data: Before initiating a factory reset, it’s crucial to back up your iPhone’s data to prevent any loss. You can use iCloud or iTunes to create a backup. Alternatively, you can manually transfer your data to a computer.
2. Disable Find My iPhone: Open the Settings app on your iPhone and navigate to your Apple ID at the top of the screen. Go to "Find My" and choose "Find My iPhone." Toggle off the "Find My iPhone" switch, and enter your Apple ID password to confirm.
3. Erase all content and settings: Go back to the main Settings app and tap on "General." Scroll down and select "Reset." Choose "Erase All Content and Settings" from the available options.
4. Authenticate and proceed: A warning message will appear, informing you that all media, data, and settings will be erased. To proceed, enter your device passcode.
5. Confirm the reset: After entering your passcode, you will be prompted to confirm the reset. Tap on "Erase iPhone" to initiate the process.
6. Wait for the reset: The factory reset process might take a few minutes to complete. Your iPhone will restart with the factory settings once the reset is finished.
7. Set up your iPhone: After the reset, your iPhone will display the "Hello" screen. Follow the on-screen instructions to set up your device as a new iPhone or restore it from a backup.
Remember, performing a factory reset will erase all data and settings on your iPhone, returning it to its original state. Make sure to back up any important data before proceeding.
How to reset iPhone to factory settings without iTunes and passcode?
Resetting an iPhone to factory settings without using iTunes and passcode can be done through the device’s settings. Here are the steps to follow:
1. Open the "Settings" app on your iPhone’s home screen.
2. Scroll down and tap on "General."
3. In the "General" settings menu, scroll down and select "Reset."
4. Tap on "Erase All Content and Settings."
Before proceeding, it’s important to note that this action will erase all data and settings on your iPhone. Therefore, it’s crucial to back up any important data before proceeding with the factory reset.
5. You’ll be prompted to enter your passcode. However, since the question specifically mentions without a passcode, let’s assume you don’t have one.
6. If prompted, you may need to enter your Apple ID password to confirm the action.
7. A pop-up window will appear, warning you one last time that this action will delete all data on your iPhone. Confirm your decision by tapping "Erase Now."
The iPhone will now begin the process of erasing all content and settings, restoring it to its factory state.
8. Once the process is complete, your iPhone will restart and present the initial setup screen.
By following these steps, you can reset your iPhone to factory settings without using iTunes or a passcode. However, it’s essential to remember that this action will erase all data on your device, so it’s crucial to have a backup of any important information beforehand.